[Gluster-users] add-brick command with replica parameter fails

Anush Shetty anush at gluster.com
Tue Mar 15 06:50:11 PDT 2011


On Tue, Mar 15, 2011 at 6:59 PM, Burnash, James <jburnash at knight.com> wrote:
> Hello.
>
> According to the GlusterFS documentation, adding bricks allows a "replica N" argument in the command line, as show by this phrase from the manual:
>
>    Brick Commands
>
>        volume add-brick VOLNAME [(replica COUNT)|(stripe COUNT)] NEW-BRICK ...
>
>            Add the specified brick to the specified volume.
>
> I currently have two servers, volume configured like this:
>
> Volume Name: test-pfs-ro1
> Type: Distributed-Replicate
> Status: Started
> Number of Bricks: 2 x 2 = 4
> Transport-type: tcp
> Bricks:
> Brick1: jc1letgfs5:/export/read-only/g01
> Brick2: jc1letgfs6:/export/read-only/g01
> Brick3: jc1letgfs5:/export/read-only/g02
> Brick4: jc1letgfs6:/export/read-only/g02
> Options Reconfigured:
> performance.stat-prefetch: on
> performance.cache-size: 2GB
> network.ping-timeout: 10
>
> I want to add the next two servers, which are identically configured with hardware, storage, filesystems, etc. However, adding the bricks using the "replica" argument to indicate that I want this added as another set of mirrors, fails - as seen below:
>
> gluster volume add-brick test-pfs-ro1 replica 2 jc1letgfs7:/export/read-only/g01 jc1letgfs8:/export/read-only/g01 jc1letgfs7:/export/read-only/g02 jc1letgfs8:/export/read-only/g02
>
> wrong brick type: replica, use <HOSTNAME>:<export-dir-abs-path>
> Usage: volume add-brick <VOLNAME> <NEW-BRICK> ...
> Adding brick to Volume test-pfs-ro1 failed
>


You needn't specify replica there for add-brick. So it should be,

gluster volume add-brick test-pfs-ro1
jc1letgfs7:/export/read-only/g01 jc1letgfs8:/export/read-only/g01
jc1letgfs7:/export/read-only/g02 jc1letgfs8:/export/read-only/g02

-
Anush


More information about the Gluster-users mailing list