[Gluster-users] Issue running GlusterFS on CentOS 6

Kwasi Gyasi - Agyei kwasi.gyasiagyei at 4things.co.za
Fri Jan 13 14:04:17 UTC 2012


Hi,


After installing GlusterFS 3.2.5 using yum on 32bit machine I came
across an issue I don't quite understand.

1. Executing the command # glustered -start , does nothing it appears
that you can just start GlusterFS with command # glusterd
2. glistered expected a file /etc/glusterfs/glusterd.vol , this is not
documented in administration guide

I created a vol file as expected bu glusterFS, but when I start it up
in debug mode

# gluster --debug

I get the following, not sure if this means it is up and running,

[2012-01-13 06:17:31.808266] I [glusterfsd.c:1493:main] 0-glusterd:
Started running glusterd version 3.2.5
[2012-01-13 06:17:31.808472] D [glusterfsd.c:374:get_volfp]
0-glusterfsd: loading volume file /etc/glusterfs/glusterd.vol
[2012-01-13 06:17:31.809319] D [xlator.c:1302:xlator_dynload]
0-xlator: dlsym(reconfigure) on
/usr/lib/glusterfs/3.2.5/xlator/storage/posix.so: undefined symbol:
reconfigure -- neglecting
[2012-01-13 06:17:31.809394] D [xlator.c:1308:xlator_dynload]
0-xlator: dlsym(validate_options) on
/usr/lib/glusterfs/3.2.5/xlator/storage/posix.so: undefined symbol:
validate_options -- neglecting
[2012-01-13 06:17:31.809702] D [xlator.c:1285:xlator_dynload]
0-xlator: dlsym(notify) on
/usr/lib/glusterfs/3.2.5/xlator/features/posix-locks.so: undefined
symbol: notify -- neglecting
[2012-01-13 06:17:31.809789] D [xlator.c:1302:xlator_dynload]
0-xlator: dlsym(reconfigure) on
/usr/lib/glusterfs/3.2.5/xlator/features/posix-locks.so: undefined
symbol: reconfigure -- neglecting
[2012-01-13 06:17:31.809882] D [xlator.c:1308:xlator_dynload]
0-xlator: dlsym(validate_options) on
/usr/lib/glusterfs/3.2.5/xlator/features/posix-locks.so: undefined
symbol: validate_options -- neglecting
[2012-01-13 06:17:31.811481] D [rpcsvc.c:1771:rpcsvc_init]
0-rpc-service: RPC service inited.
[2012-01-13 06:17:31.811570] D [rpcsvc.c:1568:rpcsvc_program_register]
0-rpc-service: New program registered: GF-DUMP, Num: 123451501, Ver:
1, Port: 0
[2012-01-13 06:17:31.811658] D
[rpc-transport.c:673:rpc_transport_load] 0-rpc-transport: attempt to
load file /usr/lib/glusterfs/3.2.5/rpc-transport/socket.so
[2012-01-13 06:17:31.811938] D [name.c:552:server_fill_address_family]
0-tcp.server: option address-family not specified, defaulting to
inet/inet6
[2012-01-13 06:17:31.812305] D [rpcsvc.c:1568:rpcsvc_program_register]
0-rpc-service: New program registered: GlusterFS 3.2.5, Num: 1298437,
Ver: 310, Port: 0
[2012-01-13 06:17:31.812368] D [rpcsvc.c:1568:rpcsvc_program_register]
0-rpc-service: New program registered: GlusterFS Handshake, Num:
14398633, Ver: 1, Port: 0
[2012-01-13 06:17:31.812469] W [posix.c:4733:init] 0-raw: Posix access
control list is not supported.
Given volfile:
+------------------------------------------------------------------------------+
 1: volume raw
 2:    type storage/posix
 3:    option directory /fileserver
 4: end-volume
 5:
 6: volume brick
 7:    type features/posix-locks
 8:    subvolumes raw
 9: end-volume
 10:
 11: volume server
 12:    type protocol/server
 13:    option transport-type tcp
 14:    subvolumes brick
 15:    option auth.addr.brick.allow *
 16: end-volume

+------------------------------------------------------------------------------+

when I issue command #gluster peer probe hostname on the same machine
running glusterFS, I get the following

[2012-01-13 06:20:47.382363] W [rpcsvc.c:148:rpcsvc_program_actor]
0-rpc-service: RPC program not available (req 1238463 1)
[2012-01-13 06:20:47.382497] W [rpcsvc.c:1066:rpcsvc_error_reply]
(-->/usr/lib/libgfrpc.so.0(rpc_transport_notify+0x3d) [0x4a46c7cd]
(-->/usr/lib/libgfrpc.so.0(rpcsvc_notify+0xb8) [0x4a46bcb8]
(-->/usr/lib/libgfrpc.so.0(rpcsvc_handle_rpc_call+0xdf)
[0x4a46b98f]))) 0-: sending a RPC error reply
[2012-01-13 06:20:47.384206] D [socket.c:193:__socket_rwv]
0-tcp.server: EOF from peer 127.0.0.1:1021
[2012-01-13 06:20:47.384247] W
[socket.c:1494:__socket_proto_state_machine] 0-tcp.server: reading
from socket failed. Error (Transport endpoint is not connected), peer
(127.0.0.1:1021)
[2012-01-13 06:20:47.384270] D [socket.c:1768:socket_event_handler]
0-transport: disconnecting now
[2012-01-13 06:20:47.384338] I [server.c:438:server_rpc_notify]
0-server: disconnected connection from 127.0.0.1:1021

The seems to be a few steps missing from the user/administration menu I think.


4Things
Multimedia and Communication | Property | Entertainment
Kwasi Owusu Gyasi - Agyei

cell        (+27) (0) 76 466 4488
website www.4things.co.za
email     kwasi.gyasiagyei at 4things.co.za
skype    kwasi.gyasiagyei
role        Developer.Designer.Software Architect



More information about the Gluster-users mailing list